造型设备  制造商、经销商、供应商

Künkel-Wagner was established in 1907 as a mechanical engineering
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.

BIBRA是一家经验丰富的制造商和供应商的机械和自制工具的金属包装行业全球。我们的客户使用我们的机器生产各种类型的盖和端为圆形和非圆形产品，深拉2件和DRD罐，AE-底部，以及扭开-和耳盖。BIBRA成立于1889年，总部位于德国汉堡附近的Barmstedt。
我们可以依靠超过125年的经验在包装行业和几十年的销售罐制造机器之前，我们自己制造超过50年现在。我们的模具部门受益于40多年的经验，在设计，建造和制造模具和工具的所有类型的切割，拉伸和成形模具。
1999年，我们将我们的模具部门搬到了巴姆施泰特，2009年，我们的烤箱部门紧随其后。因此，我们完成了一个重要的任务，将所有部门集中在一个屋檐下，缩短沟通渠道，运输和改善质量控制。随着决定制造我们自己的O形框印刷机在2011年，我们能够建立完整的自动送纸印刷机生产线与它的后端在一个屋檐下。
我们的制造范围包括所有类型的压力机和后端机器，如卷发器，衬里机，工业烤箱，辊成型机和人体制造商（锁缝）。此外，BIBRA是唯一能够为他们的机器和其他人制造自己的冲压模具和工具的公司之一。
我们的国际成功是通过把客户放在我们关注的中心来保证的。将质量、灵活性和个人专注结合在一起是你应得的，也是你可以从我们这里期待的。