分离滤芯  制造商、经销商、供应商

环磷酰胺过滤器是由不锈钢制成的水力旋风分离器。
其独特的设计产生了漩涡效应，能够将比重高于水的颗粒从进入的原水中分离出来。这些过滤器非常有效，对于测量值为75 μ m或更大的固体，去除效率高达99%，对于50 μ m的颗粒，去除效率高达65%。
环磷酰胺过滤器连续运行，不依赖于任何运动部件，这使得它们经久耐用，非常方便，因为它们几乎不需要维护。
这些过滤器带有可检查的盖子，底部盖子尤为重要，因为它包括一个废物储存罐，如果需要，可以使用手动阀（随附）或自动排水阀进行排放。

以下是水力旋流器分离器在水过滤和处理方面的一些常见应用领域：

• 采矿和矿物加工：水力旋流器用于从脉石或不需要的材料中分离有价值的矿物。它们也可以用于根据尺寸对固体进行分类。
• 除砂和清淤：在钻井作业中，水力旋流器用于从钻井液中去除沙子和淤泥颗粒。这防止了钻井设备的磨损，并确保了更平稳的操作。
• 废水处理：水力旋流器可用于在废水排放或进一步处理之前去除废水中的固体和颗粒。这减少了后续处理过程的负荷。
• 食品和饮料工业：水力旋流器可用于食品和饮料的加工，从液体中分离固体，如马铃薯工业中的淀粉和蛋白质分离。
• 化学加工：它们可用于从液体反应物中分离固体催化剂颗粒，确保产品的纯度并促进催化剂回收。
• 纸浆和造纸工业：水力旋流器用于纸浆厂，从纸浆中去除沙子、树皮和其他污染物。这导致更清洁的纸制品，并延长了加工设备的寿命。
• 灌溉：在农业环境中，可以使用水力旋流器去除灌溉水中的沙子和淤泥，确保只有干净的水到达作物，并防止灌溉系统堵塞。
• 冷却塔系统：这些分离器可用于过滤冷却塔水中的污染物，从而提高系统的效率和寿命。
• 水产养殖：在养鱼中，水力旋流器可以帮助去除颗粒废物，确保水生生物获得更清洁的水。
• 乳制品行业：水力旋流器可以根据牛奶密度的不同，将牛奶分离成脱脂牛奶和奶油。

Filter Type W is a very economical strainer:
Its pressure loss is only 50% in comparison to conventional pot / basket strainers and only 25% in comparison to Y-Filters of same dimension and sieve mesh.
This advantage reduces the cost of pump energy and result in extended reserves until the cleaning cycle. Connectors for the differential pressure are standard from size DN 150 and above (below upon request possible).
The streamlined angle of impact between the flow and the sieve / screen results in a slowly increasing pressure loss, caused by dirt, and at least more than double the operational time before cleaning.
As the cleaning cover is located at the top, the rare cleaning cycle is easily and conveniently carried out. The sieve is a closed basket and simultaneously serves the complete removal of the dirt – hence the remaining medium is already cleaned and can be just drained.
Traditional pot or basket strainers are limited by their horizontal installation in pipelines.
In the past, the option to utilise a strainer also in vertical mounting was only provided by Y-Filters – with its given disadvantages of high flow resistance and inconvenient handling of the cover for removal of the sieve (net weight of the cover, overhead work).
The Filter Type W, however, can be installed in both ways – with its given advantages in regards to minimal pressure losses and low frequency of maintenance.
In addition, equipping the Filter Type W with swivel (horizontal) or swing arm (vertikal) provides the maintenance personnel easier handling of the cover and a crane-independent removal of the sieve – with the dirt for cleaning.

Designed for: hydraulic
Filtration element: basket, strainer
Other characteristics: W
Operating pressure: Min.: 16 bar (232.06psi) / Max.: 100 bar (1450.38psi)

Strainers in pipelines have the following function:
Preventing faults and avoiding damaging of existing plant components;
Cleaning of the flowing medium.
These two primary tasks are valid in all areas of application – regardless whether the media are:

• Hot water (district heating systems)
• Cold water (Cooling Systems, municipal applications)
• Hydrocarbons (pumping of oil, petroleum, LNG/LPG)
• Acids or alkalis (chemical plants).

Generally, these tasks are fulfilled by all commercially available filter types, however with high energy requirement and frequent maintenance intervals. Additional cost for shutdown and cleaning could also be reduced.
Find enclosed a comparison of various filter types, 345 KB (.pdf)
Overall analysis and solution approach
Minimum €500 Mio. additional cost of pump energy arise in German plants every year!
The reason for this is the installation of common strainers with respective high flow resistance figures (ζ = 3 ... 7 and higher).
The Filter Type W offers with its ζ = 0.7 - 2.3 the solution:
efficient + effective= economical