切片机的22家公司 ✓ 来自 5 个国家的 B2B 制造商、经销商和供应商 ✓ 提供快速信息和价格的特别服务 ✓
切割泵，立式
- 安装在水箱上
- 45度 SAE法兰，管路连接方便
- 寿命长，由于轴承组
- 最大屑液比重1%，最大铝屑比重1.5%
- 切割铝屑(SFC)，低合金钢(SXC)和塑料屑(SPC)
切割泵，卧式
- 脚安装形式：重力供液
- 45度 SAE法兰，管路连接方便
- 寿命长，由于轴承组
- 屑液比重最大1.5 %
- 切割铝屑
- 法兰与机器安装
- 干运转能力
叶轮 轴向 / 半开式叶轮是此系列泵的特点。
液体 冷却液, 乳化液, 油 (根据需求)
水基冷却液和屑
回液泵系统
取代碎屑机
The family-owned company KNOLL supplies manufacturers and users of machine tools worldwide with conveying, filtering and pumping systems. All industries in which machine tools turn, mill, drill or grind use KNOLL products - for example mechanical engineering, electrical engineering, vehicle construction as well as the aerospace industry and energy technology. Another business unit solves demanding logistics tasks with innovative assembly and transport systems.
With over 1,000 employees, KNOLL is the largest company in the Upper Swabian town of Bad Saulgau. Walter Knoll founded the company in a 200 m² hall in 1970. It has been growing constantly on its own premises since 1974. In the beginning, the built-up area was 900 m², in 2015 it's already covering more than 54,000 m². Due to a high vertical range of manufacture, the added value remains within the company. The connection and responsibility to the structurally weak region are firmly anchored in the company's philosophy. Whether it's an airplane, a turbine blade, a car rim, a knife or a cell phone - the list of end products that KNOLL contributes to manufacturing is diverse.
- 切片机 | 金属屑清除装置 | 切削输送器
- 切片机 | 气动排屑装置
- 切片机 | 岩石破碎 | 辊式破碎机
- 切片机 | 切削输送器 | 切削输送系统
- 切片机 | 金属屑清除 | 金属屑清除装置
- 切片机 | 颚式破碎机 | 冲击式破碎机
- 切片机 | 破碎机 | 金属屑清除装置
- 切片机 | 切削输送器
- 切片机 | 破碎机
- 切片机 | 气动排屑装置
- 切片机 | 循环破碎机 | 气动排屑装置
- 切片机 | 破碎机 | 颚式破碎机
- 切片机 | 切削输送器
- 切片机 | 金属屑清除 | 金属屑清除装置
- 双转子粉碎机（TD系列）采用中速和高扭矩设计，可实现最佳粉碎性能。
- 预碎纸机-PC系列 - 结构简单。最适合去除废物混合物。节省了早期治疗的劳动力。
The single shaft shredder M series has an extended shredding chamber and a high-speed drive to fulfil your capacity and size control requirements. It achieves up to 15 tons per hour for downsizing high-volume industrial waste.
For downsizing commercial and industrial waste, this solid waste shredder produces up to 15 tons per hour with a particle size of 40-60mm. There is only one purpose of M series: to tackle all challenges in size reduction.
Waste Shredder Applications
Unbaled and baled waste: plastic bottles, plastic films, leather, fabrics, textiles, sponge and cardboard.
Industrial solid waste and waste from production.
Alternative energy production.
Preliminary treatment of RDF (refuse derived fuel), SRF (solid recovered fuel) and TDF (tire derived fuel).
Fine treatment of MSW (municipal solid waste), urban waste, sorted trash and garbage.
- 切片机 - Chip crusher for crushing aluminum chips
- 切片机 - Chip crusher for crushing steel chips
- 切片机 - Chip crusher for crushing copper turnings
- 切片机 - Chip crusher for crushing of ferrous and non-ferrous chips
For the optimal processing and shredding of swarf from the machining of aluminium, copper, steel, high-grade steel, titanium, brass, noble metals and many more materials ERDWICH always offers you the best solution whit his robust, compact cutting units.
We design your swarf shredding equipment completely tailored to your specific needs.
- 切片机 | 切削输送器 | 切削输送系统
- 振动空气粉末分级机VIB AERO 20 - 该分级机设计用于干法分离各种散装物料，以获得两种尺寸等级的产品，常规称为细粉和粗粉（称为“粗”）。该分级机允许分离多分散组合物的块状固体，生产率为5-20 m3/h或高达20万吨/年（对于体积密度为1.34 t/m...
- Scarabey®自动线 - 尝试垃圾自动造粒！
- 隔栅密封旋转百叶窗 - 挡板密闭型旋转百叶窗用于阻挡进入空气卸料机的通道，或防止气体通过干燥和除尘工厂卸料单元的下窗逸出。
- Mill TRIBOKINETIKA 3050 - TRIBOKINETIKA系列磨机，3050型号(TU3618-001-92992044-2012)，用于研磨预干燥的岩石以及硬度达8点莫氏刻度的生产废料，其容量为1至4.6米/小时（特性可能因原料的物理和机...
- Mill TRIBOKINETIKA-6050 MP - TRIBOKINETIKA系列磨机，型号为6050 MP（TU 3618-001-92992044-2012)，用于研磨预干燥的岩石以及硬度达8点莫氏刻度的生产废料，其能力为2至7 m3/h（特性可能因...
切片机 - 制造商、经销商&供应商
没时间研究 切片机？ 只需填写我们的快捷服务表单。
然后，我们将为 切片机 匹配合适的制造商、经销商或服务提供商，并将您的询盘直接转发给这些公司。
出于业务需要，您在寻找切片机吗？
出于业务需要，您在寻找切片机吗？IndustryStock 上用于产品服务的搜索引擎不仅提供关于切片机的相关搜索结果，而且您还可在此查找除切片机之外的更多产品和服务。所有用户都可免费查阅已注册的切片机制造商和经销商的所有联系方式。
请评价本页内容