测试报告的15家公司 ✓ 来自 2 个国家的 B2B 制造商、经销商和供应商 ✓ 提供快速信息和价格的特别服务 ✓
- 测试报告
- 测试报告 | 试验工作 | 事故预防规范检查
- 测试报告 | 原始样品检验、初次样品检验 | 连续测试
- 测试报告 | 试验工作 | 原始样品检验、初次样品检验
- 测试报告 | 试验工作 | 原始样品检验、初次样品检验
- 测试报告 | 原始样品检验、初次样品检验 | 初次样板检测范围
关于我们
查看更多 HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 测试报告 | 试验工作 | 检测策划
- 测试报告
- 测试报告 | 自動視覺檢測 | 设备检测
- 测试报告 | 原始样品检验、初次样品检验 | 部件故障检测
- 测试报告 | 原始样品检验、初次样品检验
- 测试报告 | 原始样品检验、初次样品检验 | 部件故障检测
- 测试报告
- 测试报告 | 质量检查 | 处置工艺流程测试
测试报告 - 制造商、经销商&供应商
没有时间搜索 测试报告 的报价？ 请填写快捷服务表单。
我们的团队会根据您的要求为 测试报告 寻找合适的制造商、经销商或服务提供商，并将您的要求直接转发给您要寻找的目标群体。
出于业务需要，您在寻找测试报告吗？
出于业务需要，您在寻找测试报告吗？IndustryStock 上用于产品服务的搜索引擎不仅提供关于测试报告的相关搜索结果，而且您还可在此查找除测试报告之外的更多产品和服务。所有用户都可免费查阅已注册的测试报告制造商和经销商的所有联系方式。
请评价本页内容
13 评价 98%